Zöld LED modulkártya Arduinohoz

Zöld LED modulkártya Arduinohoz

• Arduino fejlesztőkörnyezethez
• 6 digitális zöld közös katódos LED (Magas világítással)
• Üzemi feszültség : DC 3-12V
• Méret 17.8mm*11.43mm
• 1K ohm határoló ellenállás
• Példa program csatolva
• 1db panelt tartalmaz a csomag
• A képen szereplő nyomógomb modul külön megvásárolható a webáruházban ( termék kódja EM-044)

Arduiuo uno/mega2560 Code  1pcs

//******************************************************//

/*

Arduiuo_6led

This example code is in the public domain.

*/

// give it a name:

int D1 = 13;

int D2 = 12;

int D3 = 11;

int D4 = 10;

int D5 = 9;

int D6 = 8;

// the setup routine runs once when you press reset:

void setup() {

// initialize the digital pin as an output.

pinMode(D1, OUTPUT);

pinMode(D2, OUTPUT);

pinMode(D3, OUTPUT);

pinMode(D4, OUTPUT);

pinMode(D5, OUTPUT);

pinMode(D6, OUTPUT);

}

// the loop routine runs over and over again forever:

void loop() {

digitalWrite(D1, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a 200 Millisecond

digitalWrite(D1, LOW);    // turn the LED off by making the voltage LOW

digitalWrite(D2, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a Millisecond

digitalWrite(D2, LOW);    // turn the LED off by making the voltage LOW

digitalWrite(D3, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a Millisecond

digitalWrite(D3, LOW);    // turn the LED off by making the voltage LOW

digitalWrite(D4, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a Millisecond

digitalWrite(D4, LOW);    // turn the LED off by making the voltage LOW

digitalWrite(D5, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a Millisecond

digitalWrite(D5, LOW);    // turn the LED off by making the voltage LOW

digitalWrite(D6, HIGH);   // turn the LED on (HIGH is the voltage level)

delay(200);               // wait for a Millisecond

digitalWrite(D6, LOW);    // turn the LED off by making the voltage LOW

}

//******************************************************//